Region Free MacPro

After hunting the internet I finally managed to confirm how to change my MacPro to region free.

For this I have to give many thanks for www.rpc1.org and the administrator puma.

NB: The posting assumes that your DVR is a PIONEER DVD-RW DVR-112D and I offer no guarantees this will work or worse render your DVR unusable.

For simplicy I have attached a zip file with all the tools you’ll need.

First things first download zip file onto your mac.

dvrflash_mac.zip

The open a Terminal window in the same folder  and unpack the zip file :

mac-pro:Downloads mick$ unzip dvrflash_mac.zip
Archive: dvrflash_mac.zip
 creating: dvrflash_mac/
 inflating: dvrflash_mac/A0013000.115
 inflating: dvrflash_mac/A0013001.124
 inflating: dvrflash_mac/DVRFlash
 inflating: dvrflash_mac/Readme.DVR112D.txt
 inflating: dvrflash_mac/Readme.txt

mac-pro:Downloads mick$ cd dvrflash_mac
mac-pro:dvr_flash_mac mick$

The Readme.txt is the original from the author I have added the Readme.DVR112D.txt with some basically this article.

Next check to see that your drive is RPC-2 (region locked) as follows :

mac-pro:dvrflash_mac mick$ ./DVRFlash -v
DVRFlash v2.6.0: Pioneer DVR firmware flasher
by Agent Smith, et al., July 2008

Commandline:
 ./DVRFlash -v

Device parameter was not given, detecting all DVR drives:
 Device : A:
 Vendor : PIONEER
 Model : DVD-RW DVR-112D
 Revision : BC14
 Status : RPC-2 (region locked)
 Region : 2
 Changes : 4 region changes remaining
           4 vendor resets remaining
           state is 'Region set’
Now run DVRFlash again, from the command prompt, using
one of the device(s) listed above as first parameter

Press the Return key to exit

mac-pro:dvrflash_mac mick$

Now assuming you are happy to proceed continue with flashing the drive.

mac-pro:dvrflash_mac mick$ ./DVRFlash -ff PIONEER A0013000.115 A0013001.124

DVRFlash v2.6.0: Pioneer DVR firmware flasher
by Agent Smith, et al., July 2008

                  DISCLAIMER

THIS PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.

THE ENTIRE RISK AS TO THE ABILITY OF THIS PROGRAM TO FLASH A
PIONEER OR COMPATIBLE DVR DRIVE IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.

THIS PROGRAM IS NOT ENDORSED BY PIONEER CORPORATION OR ANY
COMPANY RESELLING PIONEER EQUIPMENT AS THEIR OWN BRAND

IF YOU UNDERSTAND THE RISKS ASSOCIATED WITH THIS PROGRAM AND
DISCHARGE BOTH THE AUTHOR AND PIONEER CORPORATION FROM ANY
DAMAGE OCCURING AS THE RESULT OF ITS USE, PLEASE INDICATE SO
BY ANSWERING THE FOLLOWING QUESTION:

Do you understand and agree to the statement above (y/n)? y

Commandline:
     ./DVRFlash -ff PIONEER A0013000.115 A0013001.124

Drive Information:
  Description  : PIONEER DVD-RW DVR-112D
  Firmware Rev : BC14
  Firmware Date : 07/09/27
  Manufacturer : PIONEER
  Drive is in normal mode.

Firmwares and Drive type mismatch
Continue because force option was specified
WARNING: Hardware and Firmware really don't match!
Continue because superforce option was specified
Are you sure you want to flash this drive (y/n)? y

Switching drive to Kernel mode:
  Description : PIONEER DVD-RW DVR-112
 Firmware Rev. : 0000
 Firmware Date : 06/08/11
 Manufacturer : PIONEER
 Drive is now in Kernel mode

Now sending the Kernel part:
Now internal Kernel reflashing. Please wait... OK.

Now sending the Normal part:
0%          25%          50%          75%         100%
|============|============|============|============|
Please hold your breath for about 30 seconds…

Now internal reflashing. Please wait... OK.

Updated Information:
   Description : PIONEER DVD-RW DVR-112
 Firmware Rev. : 1.24
 Firmware Date : 07/08/08
 Manufacturer : PIONEER

Flashing operation successful ;)

mac-pro:dvrflash_mac mick$

If everything has worked out you will now be able to play DVD’s from any region on your MacPro.

Mick

© Mick Vaites 2018